High Precision Machining Custom Made 6061 Aluminum Sheet Plate, Perforated Anodized Aluminum Sheet

• Customization: Available
• Application: Transportation Tools, Door & Window, Glass Wall, Heat Sink, Decorations
• Certification: RoHS, ISO9001, ASTM, JIS, GB, EN, ASTMB
• Model NO.: Aluminium Plate
• Technique: Extruded
• Grade: 5000 Series
• Temper: O - H112
• Surface Treatment: Color Coated
• Alloy: Alloy
• Sample: Free
• Transport Package: Wooden Pallet /Plywood Pallet /Steel Frame Pallet
• Specification: SGS, ROHS
• Trademark: Baodi
• Origin: China
• HS Code: 760612
• Production Capacity: 150, 000 Tons/Year

Product Description

Aluminium plate

Alloy: 5083,
Temper: H112, O, H22
Thickness: From 1mm to 220mm,
Width: Max 2200mm,
Length: As required

Principal Design Features:
This is a non-heat treatable alloy for strengthening. It has very good corrosion resistance, is easily welded and does have good strength.

Applications:
Commonly used in the manufacture of unfired, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, TV towers, transportation equipment, and in missile components.

Chemical composition of 5083 is below:
Aluminium Balance
Chromium 0.05 - 0.25
Copper 0.1 max
Iron 0.4 max
Magnesium 4 - 4.9
Manganese 0.4 - 1
Silicon 0.4 max
Titanium 0.15 max
Zinc 0.25 max
 

Specification	Name: 5000 series Aluminum Sheet
	Alloy: 5052, 5005, 5754, 5083 etc.
	Temper: O, H12, H22, H32, H14, H24, H26, H18, H112 etc.
	Thickness: 0.2-200mm
	Width: Up to 1800mm
	Length: up to 6000mm
	Surface treatment: mill finished, PVC coated, Print marks
Feature	Machinability: It has relatively fair machinability. It is easier to machine in the hard temper than as annealed and the quality of finish is better if machined in the hard condition. Oil lubricants should be used for machining, except that very light cuts may be done dry.
	Forming: It is readily formed at room temperature. Successive cold working decreases the formability.
	Heat Treatment: It cannot be hardened by means of heat treatment. It does harden due to cold working.
	Forging: It may be forged in the temperature range of 950 F down to 500 F
	Cold Working: The alloy cold works readily and may be formed by drawing or spinning. However the amount of cold work imparted by spinning makes intermediate annealing necessary.
	Annealing: Anneal at 650 F and air cool.
	Hardening: Hardens only from cold working.
Application	hydraulic tubes, kitchen cabinets, small boats, home freezers, milk crates, aircraft tube, fencing, small boats, gas lines, refrigerator panels, utensils, welded pressure vessels, marine, auto aircraft cryogenics, drilling rigs, TV towers, transportation equipment, missile components etc.
Alloy	Chemical Component %≤
	Si	Fe	Cu	Mn	Mg	Cr	Ni	Zn	Ti	others		Al
										single	total
5052	0.25	0.4	0.1	0.1	2.2-2.8	0.15-0.3	\	0.1	\	0.05	0.15	remainder
5005	0.3	0.7	0.2	0.2	0.5-1.1	0.1	\	0.25	\	0.05	0.15	remainder
5754	0.4	0.4	0.1	0.5	2.6-3.6	0.3	\	0.2	0.15	0.05	0.15	remainder
5083	0.4	0.4	0.1	0.4-1.0	4.0-4.9	0.05-0.25	\	0.25	0.15	0.05	0.15	remainder
Contact	Ms.Jason								Tel: [phone]