Aluminum Plate/Sheet 5052 5083 5005 Magnesium Alloys, Corrosion Resistance Aluminum Plat
|FOB Price:||US $3,500 / Ton|
|Min. Order:||1 Ton|
|Min. Order||FOB Price|
|1 Ton||US $3,500/ Ton|
|Production Capacity:||150000 Metric Tons|
|Transport Package:||Wooden Pallet|
|Payment Terms:||L/C, T/T, Western Union, Paypal, Money Gram|
- Model NO.: 5052 5083
- Technique: Rolling
- Temper: O - H112
- Alloy: Alloy
- Shape: Rectangular
- Specification: GBT 3880-2006
- HS Code: 760612
- Application: Decorations
- Grade: 5000 Series
- Surface Treatment: Mill Finish
- Type: Aluminum Sheets
- Trademark: baodisun
- Origin: China
1. Can be referred to as aluminum and magnesium alloys. The main elements for magnesium, magnesium content between 3-5%.
2. Non-heat-treatable alloy
3. Low density, high tensile strength, elongation rate is high. Good corrosion resistance, good weldability, cold workability is good.
Aluminum plate with the national standard (GB/T 3880-2006), is applicable to the unity of the aluminum alloy plate material standards.
The application scope of 5083 aluminum plate
5083 aluminum plate is often used in materials for ships, ships, vehicles, cars and aircraft plate weldments pressure vessel, which is to be strict fire prevention, cooling device, television tower, drilling equipment, transportation equipment, missile component and armor.
The chemical composition of 5083 aluminum plate
Al: Aluminum allowance
Si: 0.4 or less
Cu: 0.1 or less
Ti: 0.15 or less
The mechanical properties of 5083 aluminum plate
Tensile strength: σ B (MPa): 110-136
Elongation delta: δ 10 (%): ≥ 20
Annealing temperature: 415 ° C.
Yield strength: σ S (MPa) ≥ 110
Elongation rate: δ 5 (%) ≥ 12
Range of application of 5052 aluminum plate
5052 aluminum plate is mainly used in the request high plasticity and good weldability, working in a liquid or gas medium low load parts, such as tank, gas or oil duct, and other various liquid containers made of deep drawing parts: Small load wire used for rivet. Also commonly used in the transportation vehicles, ships, sheet metal parts, instrument, lamps stent and rivet, metal products, electrical enclosure, etc.
Chemical composition of 5052
Al: Allowance; Si: 0.25;
Cu: 0.10; Mg: 2.2 ~ 2.8;
Zinc: 0.10; Mn: 0.10;
Cr: 0.15 ~ 0.35; Fe: 0.4 0.
Mechanical properties of 5052
Tensile strength (σ B ): 170~305MPa
Conditions to yield strength: σ 0.2 (MPa)≥ 65
Modulus of elasticity: (E): 69.3 ~ 70.7 Gpa
Annealing temperature: 345 ° C.
The surface quality
1, the surface is not allowed to have crack, corrosion spots and nitrate.
2, on the surface, allowing a depth of no more than 8% of the nominal size peeling defect part wall thickness, air bubbles, surface roughness and the local mechanical damage, but the defects cannot be more than 0.5 mm, maximum depth defect sheet with a total area of no more than 5% of the total area.
3, allow the supplier polishing along the longitudinal profiles until the surface is smooth.
4, other requirements: Disucssed by both sides.